2-WAY NORMALLY CLOSED

A complete line of valves with a great selection of options and exceptional proven performance. The standard in the field. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

The flagship valve initially created for fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 5/16".

Tabs

Specifications

+ MAX. OPER. PRESS. DIFF.				ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING		CONDUIT HOUSING
AC		DC				1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

500		500		1/32	.024	22G7DGM	22G9DGM	22G7DCM	22G9DCM
250	(500)	250	(500)	3/64	.052	22H7DGM	22H9DGM	22H7DCM	22H9DCM
200	(400)	200	(400)	1/16	.095	22J7DGM	22J9DGM	22J7DCM	22J9DCM
125	(300)	125	(250)	3/32	.156	22K7DGM	22K9DGM	22K7DCM	22K9DCM
100	(200)	100	(200)	1/8	.284	22N7DGM	22N9DGM	22N7DCM	22N9DCM
75		50		5/32	.404	22O7DGM	22O9DGM	22O7DCM	22O9DCM
50		25		3/16	.500	22P7DGM	22P9DGM	22P7DCM	22P9DCM
20		5		1/4	.700	22R7DGM	22R9DGM	22R7DCM	22R9DCM
15		—		5/16	1.000	—	22S9DGM	—	22S9DCM

* FKM seals not recommended for pressure ratings above 500 PSI.
+ Ratings in brackets are optional extended ratings; consult factory.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (22N9DCM 120/60) repair pack (K22NDD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O22NDDCM 120/60)

Operating Conditions:

Media:

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

5000 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power:

AC — 7.7 Watts DC — 9.5 Watts

Coil Construction:

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air:

4 - 16 Milliseconds

Operating Speed:

Up to 600 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Stainless Steel (Std.) or Brass (Opt.)

Internal Components:

Stainless Steel. Copper – AC Only.

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

Standard 1/8" and 1/4" NPT (other ports available).

Listings:

Most valves are UL and CSA listed.*

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

Grommet Valve: 1.06 lb Conduit Valve: 1.13 lb

Repair Packs:

See table above.

Options:

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil, European Style DIN, Explosion Proof and Magnetic Latching Coil

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/