Peter Paul Series 80 828 Magnetic Latching Valve

2-WAY NORMALLY CLOSED

Large Orifice, Internally Piloted 2-Way Normally Closed Valve PeterPaul offers a line of large orifice solenoid valves to address process industry requirements for high flow rate or quick dump and fill capacity. These DC powered valves are also suited for gas and liquid applications. Port sizes for pilot lift, two way normally closed versions range from 1/2” to 3” NPT, with pressure ratings from 3 to 200 PSI.

Large orifice sizes for high flow applications.
Body is made of brass forgings or 316 stainless steel.
Operates on differential pressure — Internal Pilot.
NPT threaded connections.
Same coils and housings as our popular 20 Series.

Tabs

Specifications

VALVE SPECIFICATIONS

MAX. OPER. PRESS. DIFF.	MIN. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR	PIPE SIZE	VALVE NUMBER
DC
DC					LEADED COIL	DIN COIL

200	3	1/2	4.0	1/2 NPT	828B12DGLM	828B12DELM
200	3	3/4	5.8	3/4 NPT	828Y19DGLM	828Y19DELM
200	3	1	13.0	1 NPT	828D13DGLM	828D13DELM
200	3	1 1/2	29.0	1 1/2 NPT	828E14DGLM	828E14DELM
200	3	2	46.0	2 NPT	828F16DGLM	828F16DELM
200	3	3	76.0	2 1/2 NPT	828W17DGLM	828W17DELM
200	3	3	98.0	3 NPT	828W18DGLM	828W18DELM

Operating Conditions:

Media:

Air, water, and other fluids compatible with Buna seals. Hot water, steam, gasoline and many oils require special seal materials. Consult representative or factory.(Series 80 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Leakage:

Bubble tight

Electrical Characteristics:

Coil Voltage:

12, 24/DC

Nominal Power:

DC — 10 Watts

Coil Construction:

Molded

Typical Response Time on Air: