Series 70 Model 75

3-WAY DIRECTIONAL CONTROL

Super valves that have ratings that formerly required valves of much greater size. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Largest direct acting (non-piloted) valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Tabs

Specifications

MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	CONDUIT HOUSING

AC	DC	N.C.	N.O.	N.C.	NO	1/4 NPT PORTS	1/4 NPT PORTS

350	350	1/16	1/16	.09	.09	75JJ9ZGM	75JJ9ZCM
250	250	3/32	3/32	.22	.22	75KK9ZGM	75KK9ZCM
175	175	1/8	1/8	.35	.35	75NN9ZGM	75NN9ZCM
125	125	5/32	5/32	.45	.45	75OO9ZGM	75OO9ZCM
100	100	3/16	3/16	.50	.50	75PP9ZGM	75PP9ZCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (75OO9ZGM 120/60) repair pack (K75OOX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O75OODDGM 120/60)

Operating Conditions:

Media:

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 70 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

4000 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power:

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction:

Molded Class F (Std.), Potted and Class H Option

Typical Response Time on Air:

4 – 16 Milliseconds

Operating Speed:

Up to 600 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Stainless Steel (Std.) or Brass (Opt.)

Internal Components:

Stainless Steel. Copper – AC Only.

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

Standard 1/4" NPT (other ports available).*

Housing:

Grommet and 1/2" NPT conduit - many options available.*

Listings:

Most valves are UL and CSA listed.*

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

Grommet Valve: 2.00 lb Conduit Valve: 2.06 lb

Repair Packs:

See table above.

Options:

Alternate Port Locations, Metering and Alternate Elastomers

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/

Series 70 3-WAY DIRECTION CONTROL DIN STYLE COIL

MODEL 75
1/4-18 NPT 3-WAY DIRECTION CONTROL DIN STYLE COIL

Series 70 General Purpose Valves Conduit

MODEL 75 1/4-18 NPT
3-WAY DIRECTIONAL CONTROL
CONDUIT CONNECTION

Series 70 General Purpose Valves Grommet

MODEL 75 1/4-18 NPT
3-WAY DIRECTIONAL CONTROL
GROMMET WITH LEADS

Series 70 General Purpose Valves Grommet/Bracket Connection

Series 70 General Purpose Valves Conduit/Bracket Connection

Flow Chart Tab

Flow chart Series 70

Nomenclature Tab

Nomenclature Chart (non 58 series)

Nomenclature, all valve series except 58

* Consult representative or factory for options and specifications