Series 70 Model 72T

2-WAY NORMALLY CLOSED

Super valves that have ratings that formerly required valves of much greater size. They have higher flow at low pressures and have quick media fill or dump for air, inert gases, and oil.

Largest direct acting (non-piloted) valve we manufacture.
Large orifice.
High flow at low pressures.
Gravity feed lubrication with quick media fill or dump.

Tabs

Specifications

MAX. OPER. PRESS. DIFF.		ORIFICE SIZE	CV FACTOR	VALVE NUMBER
AC	DC			GROMMET HOUSING	CONDUIT HOUSING

25	25	3/8	1.92	72T10DGM	72T10DCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (72T10DGM 120/60) repair pack (K72TD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O72T10DGM 120/60)

Operating Conditions:

Media:

Air, inert gases, and oil. (Series 70 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

500 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power:

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction:

Molded Class F (Std.), Potted and Class H Option

Typical Response Time on Air:

6-12 Milliseconds to open and 12-28 Milliseconds to close

Operating Speed:

Up to 350 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Aluminum anodized, corrosion resistant

Internal Components:

Stainless Steel. Copper – AC Only.

Elastomers:

FKM (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

3/8" NPT

Housing:

Grommet and 1/2" NPT conduit — many options available.*

Listings:

Most valves are UL and CSA listed.*

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

1.88 lbs

Repair Packs:

See table above.

Options:

Alternate Elastomers and Stainless Steel Body*

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/

Series 70 General Purpose Valves DIN Style Coil

MODEL 72T 3/8-18 NPT
2WNC
DIN Style Coil

Series 70 General Purpose Valves Conduit

MODEL 72T 3/8-18 NPT
2WNC
CONDUIT CONNECTION

Series 70 General Purpose Valves Grommet

MODEL 72T 3/8-18 NPT
2WNC
GROMMET WITH LEADS

Series 70 General Purpose Valves Conduit/Bracket Connection

Series 70 General Purpose Valves Grommet/Bracket Connection

Flow Chart Tab

Flow chart Series 70

Nomenclature Tab

Nomenclature Chart (non 58 series)

Nomenclature, all valve series except 58

* Consult representative or factory for options and specifications