Series 30 Model 32

2-WAY NORMALLY CLOSED

Complete range of valves particularly suitable when cost and size are major factors. The bodies are constructed of brass (stainless steal). Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Brass body with stainless steel internal construction.
A smaller, cost effective alternative to any industry standard.

Tabs

Specifications

MAX. OPER. PRESS. DIFF.				ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING 1/8 NPT PORTS		CONDUIT HOUSING 1/8 NPT PORTS
AC		DC				BRASS	STAINLESS STEEL	BRASS	STAINLESS STEEL

375	(650)*	375	(650)*	1/32	.024	32G5DGM	—	32G5DCM	—
280	(650)*	280	(650)*	3/64	.055	32H5DGM	32H8DGM	32H5DCM	32H8DCM
275		250		1/16	.105	32J5DGM	32J8DGM	32J5DCM	32J8DCM
180		100		3/32	.195	32K5DGM	32K8DGM	32K5DCM	32K8DCM
130		80		7/64	.220	32L5DGM	32L8DGM	32L5DCM	32L8DCM
90		50		1/8	.275	32N5DGM	32N8DGM	32N5DCM	32N8DCM
60		25		5/32	.360	32O5DGM	32O8DGM	32O5DCM	32O8DCM
40		15		3/16	.400	32P5DGM	32P8DGM	32P5DCM	32P8DCM

* FKM seals not recommended for pressure above 500 psi.
+ Ratings in brackets are optional extended ratings; consult factory

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (32N5DGM 120/60) repair pack (K32NDD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O32N5DGM 120/60)

Operating Conditions:

Media:

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 30 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

5000 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power:

AC — 7.0 Watts DC — 8.0 Watts

Coil Construction:

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air:

4 - 16 Milliseconds

Operating Speed:

Up to 600 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Brass (Std.) or Stainless Steel (Opt.)

Internal Components:

Stainless Steel. Copper – AC Only.

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

Standard 1/8" NPT (other ports available).*

Housing:

Grommet and 1/2" NPT conduit - many options available.*

Listings:

Most valves are UL and CSA listed.*

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

Grommet Valve: 0.75 lb Conduit Valve: 0.81 lb

Repair Packs:

See table above.

Options:

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/

Series 30 2WNC General Purpose Valves Conduit

MODEL 32 1/8-NPT PORTS
2WNC
CONDUIT CONNECTION

Series 30 2WNC General Purpose Valves DIN

MODEL 32 1/8-27 NPT
2WNC
DIN STYLE COIL

Series 30 2WNC General Purpose Valves Grommet

MODEL 32
2WNC
GROMMET WITH LEADS

Series 30 2WNC General Purpose Valves Grommet/Bracket Connection

Series 30 2WNC General Purpose Valves Conduit/Bracket Connection

Flow Chart Tab

Flow chart Series 20-30

Nomenclature Tab

Nomenclature Chart (non 58 series)

Nomenclature, all valve series except 58

* Consult representative or factory for options and specifications